Airplanes don’t stay at cruising altitude forever. Eventually, they must descend so that they can prepare to land. Top-of-descent points play an important role in this process. Air traffic controllers use it to maintain traffic flow, whereas commercial airlines use it to improve efficiency. For a better understanding of top-of-descent points in aviation, keep reading.
What Is a Top-of-Descent Point?
A top-of-descent point is the point at which an airplane begins its descent. It essentially represents the location in a flight path where the airplane transitions from cruising to descent.
Cruising altitudes for commercial airplanes are typically around 35,000 feet. When an airplane approaches its destination airport, though, it must descend. The top-of-descent point marks this transition during the airplane’s flight.
How Top-of-Descent Points Are Calculated
Modern avionics typically calculate top-of-descent points automatically. Airplanes today are equipped with flight management systems (FMSs) that process massive amounts of data in real time, including the following:
- Current altitude
- Target altitude
- Airplane weight
- Winds
- Arrival restrictions
- Target speed
Even with FMS-based calculations, however, pilots may perform a manual calculation to determine the point at which they must descend. One of the most common calculations for top-of-descent points is required altitude descent / 1000 x 3 = distance to airport. This allows for a standard 3-degree glide path during the descent.
How Air Traffic Control Influences Top-of-Descent Points
Air traffic control heavily influences top-of-descent points. There are over 45,000 flights in the United States each day. Controllers, of course, are responsible for managing these flights to ensure the safe and efficient flow of traffic. This often requires specifying top-of-descent points for airplanes.
Controllers may delay an airplane’s descent to create spacing, or they may assign step-down altitudes for better traffic organization. Controllers may also change an airplane’s top-of-descent point due to weather.
Why Top-of-Descent Points Matter
Top-of-descent points matter for several reasons, one of which is efficiency. An efficient descent conserves fuel because the airplane’s engines operate near idle. The goal is to achieve a smooth and continuous glide toward the airport’s runway while minimizing thrust. With an optimized top-of-descent point, airplanes will burn less fuel.
Another reason top-of-descent points matter is for safety. Major airports like Hartsfield-Jackson Atlanta handle millions or even tens of millions of passengers each year. With so many airplanes converging from different directions, descent timing is critical. Controllers must guide airplanes to ensure they don’t follow the exact same path at the same time.
source
